(1) Overview of HPMC
Hydroxypropyl Methyl Cellulose (HPMC) is a non-ionic cellulose ether commonly used in building materials. HPMC has excellent water solubility, water retention, film-forming properties and stability, and is widely used in building materials such as tile adhesives, putty powder, gypsum board and dry mortar. In cement-based tile adhesives, HPMC plays a vital role, and its role is mainly reflected in improving construction performance, increasing bonding strength, extending open time, and increasing anti-slip properties.
(2) The role of HPMC in cement-based tile adhesives
1. Improving construction performance
HPMC can effectively improve the construction performance of cement-based tile adhesives, which is specifically manifested in the following aspects:
Increasing rheology: HPMC increases the viscosity of the adhesive through its thickening effect, making it easier to spread and adjust, thereby improving construction convenience. Appropriate rheology ensures that the adhesive can form a uniform bonding layer on the wall or floor, which is particularly important for the laying of large tiles.
Improve water retention: HPMC has excellent water retention capacity and can lock water in the adhesive to prevent water from evaporating too quickly. This not only helps the cement to fully hydrate, but also prolongs the open time of the adhesive, allowing construction workers more time to adjust and correct the position of the tiles.
Improve anti-slippage: When laying tiles, especially large tiles on vertical walls, the problem of tile slippage often troubles construction workers. HPMC increases the viscosity of the adhesive, allowing the tiles to quickly gain a certain initial bonding force after installation, thereby effectively preventing slippage.
2. Improve bond strength
HPMC can significantly improve the bond strength of cement-based tile adhesives because it can play a role in the following aspects:
Promote cement hydration: The water retention property of HPMC can maintain the moisture in the adhesive and promote more complete hydration of cement. The cement stone structure formed by the full hydration of cement is dense, thereby enhancing the bond strength of the adhesive.
Enhanced interface effect: HPMC can form a thin polymer film between the adhesive and the tile. This film has good adhesion and flexibility, which can effectively enhance the interfacial force between the adhesive and the tile base surface and improve the overall bonding strength.
3. Extended open time
The open time refers to the time from the application of the adhesive to the laying of the tile. The water retention and rheological control properties of HPMC can extend the open time of cement-based tile adhesives, which is mainly manifested in the following aspects:
Delayed water evaporation: The polymer film formed by HPMC can reduce the evaporation of water from the adhesive, so that the adhesive can maintain operability for a longer time.
Keep moist: Due to the hygroscopicity of HPMC, the adhesive can remain moist for a longer time, thereby extending the operating window and increasing the adjustment and laying time of construction personnel.
4. Increased anti-slip performance
Anti-slip performance refers to the resistance of tiles to displacement due to their own weight or external force when they are just laid. The thickening and gelling effects of HPMC can enhance the anti-slip properties of cement-based tile adhesives in the following aspects:
Improving initial adhesion: HPMC improves the initial adhesion of the adhesive, allowing tiles to quickly obtain stable positioning after laying and reduce displacement.
Forming an elastic structure: The network structure formed by HPMC in the adhesive can provide a certain elastic recovery force, which plays a key role in resisting tile slippage.
(3) The amount of HPMC used in cement-based tile adhesives
The amount of HPMC added is usually determined according to different application requirements, generally between 0.1% and 0.5%. In actual applications, it is necessary to adjust the amount according to the specific formula of the adhesive, construction conditions, and tile specifications to achieve the best effect. Adding too little HPMC will result in poor bonding, while adding too much may increase costs and affect construction performance.
(4) Selection and compatibility of HPMC
Selecting the appropriate HPMC specification in cement-based tile adhesives is crucial to product performance. Parameters such as HPMC viscosity, substitution degree and particle size will affect its final effect. Generally, the higher the viscosity of HPMC, the better its water retention and thickening effect, but the dissolution time will also increase relatively. Therefore, it is necessary to select appropriate specifications according to actual needs.
HPMC needs to be reasonably matched with other additives to achieve optimal performance. For example, the combination with additives such as ethylene glycol, propylene glycol and other cellulose ethers can further optimize the construction performance and durability of the adhesive.
(5) Development trend of HPMC in cement-based tile adhesives
With the continuous advancement of building materials technology, the requirements for the performance of cement-based tile adhesives are also getting higher and higher. As one of the key additives, the development trend of HPMC is mainly reflected in the following aspects:
Research and development of environmentally friendly HPMC: With the enhancement of environmental awareness, the research and development of low volatile organic compounds (VOC) and degradable environmentally friendly HPMC has become a trend.
Development of functional HPMC: In order to meet different construction requirements, HPMC products with specific functions (such as anti-mildew, antibacterial, color retention, etc.) are developed to improve the comprehensive performance of tile adhesives.
Application of intelligent HPMC: Intelligent HPMC can automatically adjust its performance according to environmental conditions (such as temperature, humidity, etc.), so that cement-based tile adhesives can maintain excellent performance under various construction conditions.
The application of HPMC in cement-based tile adhesives greatly improves the performance of adhesives, including improving construction performance, increasing bonding strength, extending open time and increasing anti-slip properties. Its water retention, thickening and good interface effect enable cement-based tile adhesives to achieve more excellent results in actual construction. With the continuous advancement of technology, the application areas and functions of HPMC are also constantly expanding, providing broad prospects for the development of cement-based tile adhesives.