ODM Factory Hydroxypropyl Methyl Cellulose Ether HPMC for Gypsum Plaster Based
We emphasize progress and introduce new solutions into the market each individual year for ODM Factory Hydroxypropyl Methyl Cellulose Ether HPMC for Gypsum Plaster Based, We believe that our warm and professional service will bring you pleasant surprises as well as fortune.
We emphasize progress and introduce new solutions into the market each individual year for China HPMC for Drymix Mortar and HPMC for Etics/Eifs Adhesive, Make sure you feel cost-free to send us your specifications and we’ll respond to you asap. We have got a professional engineering team to serve for the every single thorough needs. Free samples may be sent to suit your needs personally to know far more facts. So that you can meet your desires, be sure to genuinely feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
CAS:9004-65-3
Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film-former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
| Appearance | White or off-white powder |
| Methoxy ( % ) | 19.0~ 24.0 |
| Hydroxypropoxy ( % ) | 4.0 ~ 12.0 |
| pH | 5.0~ 7.5 |
| Moisture ( % ) | ≤ 5.0 |
| Residue on ignition ( % ) | ≤ 5.0 |
| Gelling temperature ( ℃ ) | 70~ 90 |
| Particle size | min.99% pass through 100 mesh |
| Typical grade | Viscosity(NDJ, mPa.s, 2%) | Viscosity(Brookfield, mPa.s, 2%) |
| HPMC MP400 | 320-480 | 320-480 |
| HPMC MP60M | 48000-72000 | 24000-36000 |
| HPMC MP100M | 80000-120000 | 40000-55000 |
| HPMC MP150M | 120000-180000 | 55000-65000 |
| HPMC MP200M | 160000-240000 | Min70000 |
| HPMC MP60MS | 48000-72000 | 24000-36000 |
| HPMC MP100MS | 80000-120000 | 40000-55000 |
| HPMC MP150MS | 120000-180000 | 55000-65000 |
| HPMC MP200MS | 160000-240000 | Min70000 |
Typical Applications of HPMC:
Tile Adhesive
●Good water retention: prolonged opening time will make tiling more efficient.
●Improved adhesion and sliding resistance: especially for heavy tiles.
●Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker.
Cement Plaster / Dry mix mortar
●Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles.
●Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time.
●Increased water demand: increased open time, expanded spry area and more economical formulation.
●Easier spreading and improved sagging resistance due to improved consistency.
Wall putty
●Water retention: maximized water content in slurry.
●Anti-sagging: when spreading a thicker coat corrugation can be avoided.
●Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation ,HPMC can increase the mortar volume.
Exterior Insulation and Finish System ( EIFS )
●Improved adhesion.
●Good wetting ability for EPS board and substrate.
●Reduced air entrancement and water uptake.
Self-leveling
●Protection from water exudation and material sedimentation.
●No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.
Crack Filler
●Better workability: proper thickness and plasticity.
●Water retention ensures prolonged work time.
●Sag resistance: improved mortar bonding ability.
Pharmaceutical excipient and food application：
| Usage | Product grade | Dosage |
| Bulk Laxative | 75K4000,75K100000 | 3-30% |
| Creams, Gels | 60E4000,65F4000,75F4000 | 1-5% |
| Ophthalmic Preparation | 60E4000 | 01.-0.5% |
| Eye drops preparations | 60E4000, 65F4000, 75K4000 | 0.1-0.5% |
| Suspending agent | 60E4000, 75K4000 | 1-2% |
| Antacids | 60E4000, 75K4000 | 1-2% |
| Tablets binder | 60E5, 60E15 | 0.5-5% |
| Convention Wet Granulation | 60E5, 60E15 | 2-6% |
| Tablet coatings | 60E5, 60E15 | 0.5-5% |
| Controlled Release Matrix | 75K100000,75K15000 | 20-55% |
Packaging:
HPMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag.
Storage:
Keep it in cool dry warehouse,away from moisture, sun,fire,rain.
ODM Factory Hydroxypropyl Methyl Cellulose Ether HPMC for Gypsum Plaster Based Related Video: