Leading Manufacturer for Youngcel HPMC Chemicals Hydroxypropyl Methyl Cellulose HPMC CAS 9004-65-3 for Hand Sanitizer
The corporation upholds the philosophy of “Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth”, will proceed to provide aged and new buyers from home and abroad whole-heatedly for Leading Manufacturer for Youngcel HPMC Chemicals Hydroxypropyl Methyl Cellulose HPMC CAS 9004-65-3 for Hand Sanitizer, We aim at Ongoing system innovation, management innovation, elite innovation and industry innovation, give full play on the overall advantages, and continuously make improvements to service high-quality.
The corporation upholds the philosophy of “Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth”, will proceed to provide aged and new buyers from home and abroad whole-heatedly for HPMC and Hydroxypropyl Methyl Cellulose, With the highest standards of product quality and service, our items have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We have been very pleased to serve customers from all over the world!
CAS:9004-65-3
Hydroxypropyl MethylCellulose (HPMC) or hypromellose are water soluble methyl cellulose ether,which are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film-former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
| Appearance | White or off-white powder |
| Methoxy ( % ) | 19.0~ 24.0 |
| Hydroxypropoxy ( % ) | 4.0 ~ 12.0 |
| pH | 5.0~ 7.5 |
| Moisture ( % ) | ≤ 5.0 |
| Residue on ignition ( % ) | ≤ 5.0 |
| Gelling temperature ( ℃ ) | 70~ 90 |
| Particle size | min.99% pass through 100 mesh |
| Typical grade | Viscosity(NDJ, mPa.s, 2%) | Viscosity(Brookfield, mPa.s, 2%) |
| HPMC MP400 | 320-480 | 320-480 |
| HPMC MP60M | 48000-72000 | 24000-36000 |
| HPMC MP100M | 80000-120000 | 40000-55000 |
| HPMC MP150M | 120000-180000 | 55000-65000 |
| HPMC MP200M | 160000-240000 | Min70000 |
| HPMC MP60MS | 48000-72000 | 24000-36000 |
| HPMC MP100MS | 80000-120000 | 40000-55000 |
| HPMC MP150MS | 120000-180000 | 55000-65000 |
| HPMC MP200MS | 160000-240000 | Min70000 |
Typical Applications of HPMC:
Tile Adhesive
●Good water retention: prolonged opening time will make tiling more efficient.
●Improved adhesion and sliding resistance: especially for heavy tiles.
●Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker.
Cement Plaster / Dry mix mortar
●Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles.
●Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time.
●Increased water demand: increased open time, expanded spry area and more economical formulation.
●Easier spreading and improved sagging resistance due to improved consistency.
Wall putty
●Water retention: maximized water content in slurry.
●Anti-sagging: when spreading a thicker coat corrugation can be avoided.
●Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation ,HPMC can increase the mortar volume.
Exterior Insulation and Finish System ( EIFS )
●Improved adhesion.
●Good wetting ability for EPS board and substrate.
●Reduced air entrancement and water uptake.
Self-leveling
●Protection from water exudation and material sedimentation.
●No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.
Crack Filler
●Better workability: proper thickness and plasticity.
●Water retention ensures prolonged work time.
●Sag resistance: improved mortar bonding ability.
Pharmaceutical excipient and food application：
| Usage | Product grade USP/EP/E464 | Dosage |
| Bulk Laxative | HPMC K4M,HPMC K100M | 3-30% |
| Creams, Gels | HPMC E4M,HPMC F4M,HPMC K4M | 1-5% |
| Ophthalmic Preparation | HPMC E50 | 01.-0.5% |
| Eye drops preparations | HPMC E4M, HPMC F4M, HPMC K4M | 0.1-0.5% |
| Suspending agent | HPMC E3, HPMC E5 | 1-2% |
| Antacids | HPMC E50, HPMC F50 | 1-2% |
| Tablets binder | HPMC E5, HPMC E100 | 0.5-5% |
| Convention Wet Granulation | HPMC E5, HPMC A4C | 2-6% |
| Tablet coatings | HPMC E5, HPMC E15 | 0.5-5% |
| Controlled Release Matrix | HPMC K100 ,HPMC K100M | 20-55% |
Packaging:
HPMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag.
Storage:
Keep it in cool dry warehouse,away from moisture, sun,fire,rain.The corporation upholds the philosophy of “Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth”, will proceed to provide aged and new buyers from home and abroad whole-heatedly for Leading Manufacturer for Youngcel HPMC Chemicals Hydroxypropyl Methyl Cellulose HPMC CAS 9004-65-3 for Hand Sanitizer, We aim at Ongoing system innovation, management innovation, elite innovation and industry innovation, give full play on the overall advantages, and continuously make improvements to service high-quality.
Leading Manufacturer for HPMC and Hydroxypropyl Methyl Cellulose, With the highest standards of product quality and service, our items have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We have been very pleased to serve customers from all over the world!
Leading Manufacturer for Youngcel HPMC Chemicals Hydroxypropyl Methyl Cellulose HPMC CAS 9004-65-3 for Hand Sanitizer Related Video: